United States-English

MPE/iX Error Messages Manual Volume III: HP 3000 MPE/iX Computer Systems > Chapter 2 Error Messages Viii C 2

High Level I/O

»

Technical documentation


	Complete book in PDF


»	Feedback

» Table of Contents

(Subsystem 111)

1

MESSAGE: The I/O request was aborted.
CAUSE: Many possible causes.
ACTION: This is a warning message and not a standard error condition. Therefore, no additional action is required.

2

MESSAGE: The I/O request is currently active.
CAUSE: Same as message content.
ACTION: This is a warning message and not a standard error condition. Therefore, no additional action is required.

3

MESSAGE: The request is currently queued in the manager's input queue.
CAUSE: Same as message content.
ACTION: This is a warning message and not a standard error condition. Therefore, no additional action is required.

4

MESSAGE: The LDEV specified was invalid.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

5

MESSAGE: The LDEV specified was not configured.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

6

MESSAGE: A bad virtual address or nil pointer was specified.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

7

MESSAGE: The length specified was negative, or the total length in the user data chain did not add up to length.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

8

MESSAGE: The sector specified was zero.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

9

MESSAGE: The function specified was invalid for this device.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

10

MESSAGE: The message was not found in the input queue.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

11

MESSAGE: The subqueue specified is used by the I/O system.
CAUSE: Same as for message Content.
ACTION: Call your Hewlett-Packard Representative.

13

MESSAGE: The I/O completion port must be ICS-sendable.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

14

MESSAGE: The I/O completion port must be able to handle the largest HLIO message.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

15

MESSAGE: The I/O completion port must have 32 subqueues.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

17

MESSAGE: The procedure can not be called from the ICS.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

18

MESSAGE: The device is in a disabled state, and I/O may not be performed to it.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

19

MESSAGE: The data chain passed to SENDIO had unaligned data.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

20

MESSAGE: The I/O request has generated more than the maximum of 32 data chains.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

21

MESSAGE: The I/O request index supplied was outside the range of the table. CAUSE
Internal error.: ACTION
: Call your Hewlett-Packard Representative.

22

MESSAGE: The RENDEZVOUS for the I/O request has already been done. CAUSE
Internal error.: ACTION
: Call your Hewlett-Packard Representative.

24

MESSAGE: A message was received by the LDM that was not understood.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

25

MESSAGE: A request to release the device was issued while the device was still allocated.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

26

MESSAGE: A die request was sent to the LDM, but the LDM is still bound to DM.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

27

MESSAGE: A request to release the device was issued while I/O was still active.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

28

MESSAGE: The LDM is bound to a different DM than specified in the LDM_DO_UNBIND_MSG.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

29

MESSAGE: The request failed because we were out of resources.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

30

MESSAGE: The function requested is not implemented.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

31

MESSAGE: There are currently no outstanding requests for the device.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

32

MESSAGE: The device class is invalid.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

33

MESSAGE: The COMPATIBILITY MODE I/O queue index is invalid.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

34

MESSAGE: There is a flow control problem in the LDM.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

35

MESSAGE: There is a flow control problem in the LDM.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

36

MESSAGE: The procedure failed to make the user's buffer present.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

37

MESSAGE: The request to abort a MIB chain has found an already aborted MIB.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

38

MESSAGE: An HLIO internal error was detected.
CAUSE: Internal error.
ACTION: Call your Hewlett-Packard Representative.

Printable version


Privacy statement	Using this site means you accept its terms	Feedback to webmaster

© Hewlett-Packard Development Company, L.P.