 |
» |
|
|
|
A- A-Class
- default
configuration, Default Configurations Used by INSTALL and UPDATE
- AAUTO
- SYSFILE
configurator command, Displaying Current File Information
- ABOOT
- SYSFILE
configurator command, Displaying Current File Information, Adding Boot Files
- ABORTJOB
- MPE/iX
command, Running ODE
- access port
- configuring, Returning from Control Mode to Console Mode
- access
port (AP), Resetting the System Using the Console
- support interface, Resetting the System Using the Console
- testing, Transferring Control (Soft Reset)
- using, Using the Access Port (AP)
- access port commands, Using Access Port Commands
- RS, Hard Reset
- TC, Soft Reset
- Using, Using Access Port Commands
- access
port(AP)
- using, Resetting the System Using the Console
- account
- SYS, Using the System Generator (SYSGEN)
- accounts
used to store configuration data, Using the System Generator (SYSGEN)
- ACLASS
- I/O
Configurator command, Adding Objects in SYSGEN
- ACMSL
- SYSFILE
Configurator command, Displaying Current File Information
- SYSFILE
configurator command, Adding a Segment to the Compatibility Mode Segmented Library (CMSL)
- activating
the configurators
- SYSGEN utility, Activating the Configurators
- adding
a boot image to the SYSGEN tape, Displaying Current File Information
- adding
a segment to a temporary copy of the CMSL, Displaying Current File Information
- adding
an autoboot FILE to the SYSGEN tape, Displaying Current File Information
- adding
classes in SYSGEN, Adding Objects in SYSGEN
- adding devices
in SYSGEN, Adding Objects in SYSGEN
- adding
file names to DUMP to TAPE, Adding File Names to Dump to Tape
- adding I/O paths
in SYSGEN, Adding Objects in SYSGEN
- adding
objects to the SYSGEN tape, Displaying Current File Information
- ADEV
- I/O
Configurator command, Adding Objects in SYSGEN
- alternate boot
paths, I/O Paths Used to Boot a System
- analyser cards, Displaying Configured Devices
- AP
error messages
- interpreting, Changing Master Consoles
- AP
help facility
- using, Using Access Port Commands
- AP
informational messages
- interpreting, Changing Master Consoles
- AP.
See access port, Resetting the System Using the Console
- APATH
- I/O
Configurator command, Adding Objects in SYSGEN
- ASPROG
- SYSFILE
configurator command, Displaying Current File Information, Adding File Names to Dump to Tape
- autoboot
and autosearch
- autoboot, Activating and Deactivating Autoboot and Autosearch Functions
- autosearch, Activating and Deactivating Autoboot and Autosearch Functions
- boot search, Activating and Deactivating Autoboot and Autosearch Functions
- manual, Activating and Deactivating Autoboot and Autosearch Functions
- AUTOBOOT command, Testing the System, Activating and Deactivating Autoboot and Autosearch Functions
- autoboot file, How System Startup is Carried Out, Autobooting the System
- listing current contents, Listing Autoboot File Contents
- autoboot
flag, Resetting the System Using the Console
- enabling and disabling, Activating and Deactivating Autoboot and Autosearch Functions
- autoboot images
- deleting, Deleting Autoboot Images
- replacing, Replacing Autoboot Images
- autobooting
a Series 925, Autobooting the System
- autobooting a system, How System Startup is Carried Out
- autoexecute file, How System Startup is Carried Out, Resetting the System Using the Console, Autobooting the System
- AUTOSEARCH command, Activating and Deactivating Autoboot and Autosearch Functions
- autosearch
flag
- enabling and disabling, Activating and Deactivating Autoboot and Autosearch Functions
- AVOL
- I/O
Configurator command, Adding Objects in SYSGEN
B- backing up the system, Backing up the System and Retaining the Current Configuration, Using the INSTALL Utility to Recover a Lost System, Back up the System and Retain the Current Configuration, Using the System Generator (SYSGEN)
- base configuration
group, Using the System Generator (SYSGEN)
- see configuration group, Using the System Generator (SYSGEN)
- base
group
- specifying, Specifying the Base Group
- base system files, ISL Boot Utilities
- BASEGROUP
- SYSGEN
command, Specifying the Base Group, Holding and Saving Configuration Changes, Adding a Peripheral to Any System
- basegroup, Using the System Generator (SYSGEN)
- see
configuration group, Using the System Generator (SYSGEN)
- boot command
options, Interrupting an Autobooting System
- boot
error codes, Interrupting an Autobooting System
- boot images
- deleting, Deleting Boot Images
- replacing, Replacing Boot Images
- boot path
- improper, Interrupting an Autobooting System
- boot paths
- alternate, I/O Paths Used to Boot a System
- console, I/O Paths Used to Boot a System
- primary, I/O Paths Used to Boot a System
- boot tape, How System Configuration Is Performed, Using the System Generator (SYSGEN)
- boot utilities.
See ISL utilities, ISL Boot Utilities
- booting sequences, How System Startup is Carried Out
- booting
the system, The Booting Process
- bus converter, Using the SYSGEN I/O Configurator
C- cache, Displaying Configured Devices
- central
bus, Selecting I/O Paths
- see CTB, Selecting I/O Paths
- changing
the I/O configuration online, Using the IOCONFIG Utility
- channel adapter, Selecting I/O Paths
- channel
I/O bus, Selecting I/O Paths
- CIO
bus, Selecting I/O Paths
- classes
- adding
in SYSGEN, Adding Objects in SYSGEN
- CLEAR
- LOG
configurator command, Clearing Log Configuration Changes
- MISC
configurator command, Clearing MISC Configuration Changes
- SYSGEN
command, Using the System Generator (SYSGEN), Clearing Configuration Changes
- clearing
configuration changes, Clearing Log Configuration Changes, Clearing MISC Configuration Changes
- SYSGEN utility, Clearing Configuration Changes
- CMSL, Displaying Current File Information
- adding
a segment to, Adding a Segment to the Compatibility Mode Segmented Library (CMSL)
- replacing
a segment of, Replacing a CMSL Segment
- see
compatibility mode segment library, Displaying Current File Information
- co-processor, Displaying Configured Devices
- codes
for ISL utility names, Reading Nonvolatile Memory (NVM)
- command
interpreter
- using, Entering Control Mode and Using the Command Interpreter
- command syntax
- SYSGEN
utility, SYSGEN Command Syntax
- commands
- I/O
configurator, Viewing the Current Configuration
- commands
- I/O Configurator
- ACLASS, Adding Objects in SYSGEN
- ADEV, Adding Objects in SYSGEN
- APATH, Adding Objects in SYSGEN
- AVOL, Adding Objects in SYSGEN
- DCLASS, Deleting Objects in SYSGEN
- DDEV, Deleting Objects in SYSGEN
- DPATH, Deleting Objects in SYSGEN
- DVOL, Deleting Objects in SYSGEN
- MADDRESS, Changing Configurations in SYSGEN
- MCLASS, Changing Configurations in SYSGEN
- MDEV, Changing Configurations in SYSGEN
- MPATH, Changing Configurations in SYSGEN
- MVOL, Changing Configurations in SYSGEN
- commands
- I/O configurator
- HELP, Getting Help with I/O Configurator Commands
- LCLASS, Viewing the Current Configuration
- LDEV, Viewing the Current Configuration
- LPATH, Viewing the Current Configuration
- LVOL, Viewing the Current Configuration
- MADDRESS, Using I/O Configurator Commands
- OCLOSE, Printing the Configuration Information
- commands
- IO configurator
- ADEV, Adding a Peripheral to Any System
- APATH, Adding a Peripheral to Any System
- EXIT, Adding a Peripheral to Any System
- HOLD, Adding a Peripheral to Any System
- LCLASS, Adding a Peripheral to Any System
- LDEV, Adding a Peripheral to Any System
- LPATH, Adding a Peripheral to Any System
- OCLOSE, Adding a Peripheral to Any System
- commands - ISL
- ODE, Running ODE
- START, Entering the SYSGEN Global Module, Overview
- commands
- LOG configurator
- CLEAR, Clearing Log Configuration Changes
- EXIT, Exiting the LOG Configurator
- HELP, Using the LOG Configurator Help Facility
- HOLD, Holding and Saving Configuration Changes
- OCLOSE, Showing Current LOG Values
- SHOW, Showing Current LOG Values
- SLOG, Logging System Events
- ULOG, Logging User Events
- commands
- MISC configurator
- CLEAR, Clearing MISC Configuration Changes
- DRIN, Deleting Global Resource Identification Numbers (RIN)
- EXIT, Exiting the MISC Configurator
- help, Using the MISC Configurator Help Facility
- HOLD, Holding and Saving Configuration Changes
- JOB, Configuring Job-Related Limits
- LRIN, Displaying Allocated Global RINs
- OCLOSE, Displaying Allocated Global RINs
- RESOURCE, Setting Resource Allocations
- SESSION, Setting Session-Related Limits
- SHOW, Showing Values of Current Configurable Items
- STACK, Setting Sizes of Native Mode and Compatibility Mode Stacks
- SYSTEM, Setting Strings and String Parameters
- commands -
MPE XL
- REPLY, Adding a Peripheral to Any System
- commands - MPE/iX
- ABORTJOB, Running ODE
- HELLO, Running ODE
- JOBFENCE, Running ODE
- LIMIT, Running ODE
- SHOWJOB, Running ODE
- TELL, Running ODE
- WARN, Running ODE
- commands
- SYSFILE configurator
- AAUTO, Displaying Current File Information
- ABOOT, Displaying Current File Information, Adding Boot Files
- ACMSL, Displaying Current File Information, Adding a Segment to the Compatibility Mode Segmented Library (CMSL)
- ASPROG, Displaying Current File Information, Adding File Names to Dump to Tape
- DAUTO, Deleting Objects from the SYSGEN Tape, Deleting Autoboot Images
- DBOOT, Deleting Objects from the SYSGEN Tape, Deleting Boot Images
- DCMSL, Deleting Objects from the SYSGEN Tape, Deleting Compatibility Mode Segments from a SYSGEN Tape
- DSPROG, Deleting Objects from the SYSGEN Tape, Removing System Programs from a SYSGEN Tape
- help, Using the SYSFILE Configurator Help Facility
- RAUTO, Replacing Objects on the SYSGEN Tape
- RBOOT, Replacing Objects on the SYSGEN Tape, Replacing Boot Images
- RCAT, Replacing Objects on the SYSGEN Tape, Configuring a Message Catalog
- RCMSL, Replacing Objects on the SYSGEN Tape, Replacing a CMSL Segment
- RDCC, Replacing Objects on the SYSGEN Tape, Replacing or Defining a Network Configuration File
- RIPL, Replacing Objects on the SYSGEN Tape
- RNMLIB, Replacing Objects on the SYSGEN Tape
- RSPROG, Replacing Objects on the SYSGEN Tape
- SHOW, Displaying Current File Information
- commands - SYSGEN
- BASEGROUP, Specifying the Base Group, Holding and Saving Configuration Changes, Adding a Peripheral to Any System
- CLEAR, Using the System Generator (SYSGEN), Clearing Configuration Changes
- EXIT, Exiting SYSGEN
- HOLD, Saving Configuration Changes
- IO, Adding a Peripheral to Any System
- KEEP, Using the System Generator (SYSGEN), Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes, Adding a Peripheral to Any System
- LOG, Entering the LOG Configurator
- MISC, Entering the MISC Configurator
- OCLOSE, Showing the State of Configurators, Generating a System Load Tape
- PERMYES, Confirming Potentially Serious Actions
- SHOW, Showing the State of Configurators
- SYSFILE, Entering the SYSFILE Configurator
- TAPE, Generating a System Load Tape, Adding a Peripheral to Any System
- commands in SYSSTART
file, Executing Commands During System Startup
- commands, access
port
- RS, Hard Reset
- TC, Soft Reset
- compatibility
mode segment library, Displaying Current File Information
- see CMSL, Displaying Current File Information
- CONFIG
- UPDATE
option, Using the UPDATE Utility and Options
- CONFIG group, Using the System Generator (SYSGEN)
- CONFIG.SYS, Using the UPDATE Utility and Options, Default Configurations Used by INSTALL and UPDATE
- configuration
- disk
drives, Adding a Peripheral to Any System
- retaining
current, Backing up the System and Retaining the Current Configuration, Back up the System and Retain the Current Configuration
- SCSI, Adding a Peripheral to Any System
- configuration
changes
- clearing, Clearing Log Configuration Changes, Clearing MISC Configuration Changes
- holding, Holding and Saving Configuration Changes
- saving, Holding and Saving Configuration Changes
- configuration
data, Using the System Generator (SYSGEN)
- account used to store, Using the System Generator (SYSGEN)
- erasing changes, Using the System Generator (SYSGEN)
- modifying, Modifying Input/Output (I/O) Configurations, I/O Paths Used to Boot a System
- storing, How System Configuration Is Performed
- configuration
files
- copying, Using SYSGEN to Copy the Files
- creating, Using the System Generator (SYSGEN)
- permanent, Using the System Generator (SYSGEN)
- temporary, Using the System Generator (SYSGEN)
- configuration
group, Using the System Generator (SYSGEN)
- configuring
a message catalog, Configuring a Message Catalog
- configuring
job related limits, Configuring Job-Related Limits
- configuring
local devices, Modifying Input/Output (I/O) Configurations
- configuring terminals, How System Configuration Is Performed
- configuring the console, Using the Access Port (AP)
- confirming
potentially serious actions
- SYSGEN utility, Confirming Potentially Serious Actions
- console
messages
- sending, Enabling Remote Console Access
- console
mode
- returning from control mode, Using the AP Help Facility
- console
path, I/O Paths Used to Boot a System
- constructing
I/O paths, Selecting I/O Paths
- control mode
- entering, Resetting the System Using the Console, Entering Control Mode and Using the Command Interpreter, Testing the AP
- control mode (CM), Resetting the System Using the Console
- copying
default configuration file groups, Copying Default Configuration File Groups
- creating configuration
files, Using the System Generator (SYSGEN)
- CTB, Selecting I/O Paths
- see
central bus, Selecting I/O Paths
- CTRL B, Resetting the System Using the Console
D- DAUTO
- SYSFILE
configurator command, Deleting Objects from the SYSGEN Tape, Deleting Autoboot Images
- DBOOT
- SYSFILE
configurator command, Deleting Objects from the SYSGEN Tape, Deleting Boot Images
- DCLASS
- I/O
Configurator command, Deleting Objects in SYSGEN
- DCMSL
- SYSFILE
configurator command, Deleting Objects from the SYSGEN Tape, Deleting Compatibility Mode Segments from a SYSGEN Tape
- DDEV
- I/O
Configurator command, Deleting Objects in SYSGEN
- default
configuration groups
- A-Class, Default Configurations Used by INSTALL and UPDATE
- ALINE925, Default Configurations Used by INSTALL and UPDATE, Overview
- ALINK925, Default Configurations Used by INSTALL and UPDATE, Overview
- ALINK932, Default Configurations Used by INSTALL and UPDATE
- ALINK935, Default Configurations Used by INSTALL and UPDATE, Overview
- ALINK948, Default Configurations Used by INSTALL and UPDATE
- ALINK958, Default Configurations Used by INSTALL and UPDATE
- ALINK990, Default Configurations Used by INSTALL and UPDATE
- ALINK991, Default Configurations Used by INSTALL and UPDATE
- ALINK992, Default Configurations Used by INSTALL and UPDATE
- ALINK995, Default Configurations Used by INSTALL and UPDATE
- CONF9X71, Default Configurations Used by INSTALL and UPDATE
- CONF9X72, Default Configurations Used by INSTALL and UPDATE
- CONF9X73, Default Configurations Used by INSTALL and UPDATE
- CONF9X74, Default Configurations Used by INSTALL and UPDATE
- CONF9X75, Default Configurations Used by INSTALL and UPDATE
- CONFE925, Default Configurations Used by INSTALL and UPDATE, Overview
- CONFE950, Default Configurations Used by INSTALL and UPDATE, Overview
- CONFG920, Default Configurations Used by INSTALL and UPDATE
- CONFG922, Default Configurations Used by INSTALL and UPDATE
- CONFG925, Default Configurations Used by INSTALL and UPDATE, Overview
- CONFG932, Default Configurations Used by INSTALL and UPDATE
- CONFG935, Default Configurations Used by INSTALL and UPDATE, Overview
- CONFG948, Default Configurations Used by INSTALL and UPDATE
- CONFG950, Default Configurations Used by INSTALL and UPDATE, Overview
- CONFG958, Default Configurations Used by INSTALL and UPDATE
- CONFG990, Default Configurations Used by INSTALL and UPDATE
- CONFG991, Default Configurations Used by INSTALL and UPDATE
- CONFG992, Default Configurations Used by INSTALL and UPDATE
- CONFG995, Default Configurations Used by INSTALL and UPDATE
- CONFSCS0, Default Configurations Used by INSTALL and UPDATE
- N-Class, Default Configurations Used by INSTALL and UPDATE
- default options
- INSTALL utility, Using the INSTALL Utility and Options
- START
utility, Using START and its Options
- UPDATE utility, Using the UPDATE Utility and Options
- defining
a network configuration file, Replacing or Defining a Network Configuration File
- defining
system parameters, What Is System Configuration?
- deleting
autoboot images, Deleting Autoboot Images
- deleting boot images, Deleting Boot Images
- deleting classes
in SYSGEN, Deleting Objects in SYSGEN
- deleting
compatibility mode segments from a SYSGEN tape, Deleting Compatibility Mode Segments from a SYSGEN Tape
- deleting devices
in SYSGEN, Deleting Objects in SYSGEN
- deleting
global resource identification numbers, Deleting Global Resource Identification Numbers (RIN)
- deleting I/O
paths in SYSGEN, Deleting Objects in SYSGEN
- deleting
objects from the SYSGEN tape, Deleting Objects from the SYSGEN Tape
- detecting
system independent errors, Generating a System Load Tape
- determining I/O paths, Selecting I/O Paths
- device adapter, Selecting I/O Paths
- devices
- listing, Determining and Selecting Input and Output (I/O) Paths
- verifying, Verifying Attached Devices
- disk boots, Initial System Loader (ISL)
- displaying
autoboot and autosearch settings, Displaying Current Boot Path, Autoboot, and Autosearch Settings
- displaying
current file information, Displaying Current File Information
- displaying
fastsize value, Displaying Current Boot Path, Autoboot, and Autosearch Settings
- displaying local
RINs, Displaying Allocated Global RINs
- displaying
state of configurators
- SYSGEN utility, Showing the State of Configurators
- DPATH
- I/O
Configurator command, Deleting Objects in SYSGEN
- DRIN
- MISC
configurator command, Deleting Global Resource Identification Numbers (RIN)
- DSPROG
- SYSFILE
configurator command, Deleting Objects from the SYSGEN Tape, Removing System Programs from a SYSGEN Tape
- DUMP, Soft Reset
- dump
listing, Startup, Dump, and Shutdown Listings
- DUMP
sequence, START Sequence
- DUMP utility, ISL Boot Utilities, What is the Function of the DUMP Utility?, Using the DUMP Utility and Options
- default options, Using the DUMP Utility and Options
- SUBSET
option, Using the DUMP Utility and Options
- DUMPAREA, Initial System Loader (ISL)
- dumping
a system, ISL Boot Utilities
- DVOL
- I/O
Configurator command, Deleting Objects in SYSGEN
E- enabling
and disabling the autoboot flag, Activating and Deactivating Autoboot and Autosearch Functions
- enabling
and disabling the autosearch flag, Activating and Deactivating Autoboot and Autosearch Functions
- entering
an MPE command from the LOG configurator, Entering an MPE Command from the LOG Configurator
- entering
an MPE command from the MISC configurator, Entering an MPE Command from the MISC Configurator
- entering
ODE, Running ODE
- entering
the LOG configurator, Entering the LOG Configurator
- entering the
MISC configurator, Entering the MISC Configurator
- entering
the SYSFILE configurator, Entering the SYSFILE Configurator
- entering
the SYSGEN global module, Entering the SYSGEN Global Module, Redirecting SYSGEN Input and Output
- erasing
configuration changes, Using the System Generator (SYSGEN)
- error
codes, Interpreting AP Error and Informational Messages
- error
messages, Interpreting AP Error and Informational Messages
- escape
characters
- entering, Allowing Scrolling
- EXIT
- LOG
configurator command, Exiting the LOG Configurator
- MISC
configurator command, Exiting the MISC Configurator
- SYSGEN
command, Exiting SYSGEN
- exiting
MAPPER, Exiting mapper2
- exiting
MODE, Exiting ODE
- exiting SYSGEN, Exiting SYSGEN
- exiting the
LOG configurator, Exiting the LOG Configurator
- exiting the
MISC configurator, Exiting the MISC Configurator
F- fastsize, Using Initial System Loader (ISL) Commands, Displaying Current Boot Path, Autoboot, and Autosearch Settings
- file information
- displaying, Displaying Current File Information
- first level commands,
using, Using First-Level (Global Module) Commands
- first-time installation, Installing the Operating System, Installing the Operating System: a Preview
- formal file
designators
- $STDINX, Entering the SYSGEN Global Module
- $STDLIST, Entering the SYSGEN Global Module
- SYSGIN, Entering the SYSGEN Global Module
- SYSGOUT, Entering the SYSGEN Global Module
- full system backup, Using the System Generator (SYSGEN)
G- generating
a boot tape, Generating a System Load Tape
- global
resource identification numbers
- deleting, Deleting Global Resource Identification Numbers (RIN)
- see GRINS, Deleting Global Resource Identification Numbers (RIN)
- GRIN, Deleting Global Resource Identification Numbers (RIN)
- see
global resource identification numbers, Deleting Global Resource Identification Numbers (RIN)
- group
- CONFIG, Using the System Generator (SYSGEN)
- GSP, Using the Guardian Service Processor (GSP)
- GSP access
port, Resetting the System Using the Console
- GSP
command mode, Using the GSP Help Facility
- GSP configuration
parameters, Configuring the Console terminal
- GSP security, Security Options & access control (SO)
H- halting commands
- SYSGEN
utility, Halting SYSGEN Command Actions
- halting
SYSGEN command actions, Halting SYSGEN Command Actions
- hard reset, Hard Reset, Resetting the System Using the Console
- hardware clock, Reading and Setting the Hardware Clock
- HELLO
- MPE/iX
command, Running ODE
- HELP
facility
- LOG configurator, Using the LOG Configurator Help Facility
- help
facility
- I/O configurator, Getting Help with I/O Configurator Commands
- MISC
configurator, Using the MISC Configurator Help Facility
- SYSFILE configurator, Using the SYSFILE Configurator Help Facility
- SYSGEN global module, Using the Help Facility in SYSGEN's Global Module
- HOLD
- LOG
configurator command, Holding and Saving Configuration Changes
- MISC
configurator command, Holding and Saving Configuration Changes
- SYSGEN
command, Saving Configuration Changes
- holding configuration
changes, Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes
I- I/O configuration
- modifying, Modifying Input/Output (I/O) Configurations, I/O Paths Used to Boot a System
- I/O configuration
changes
- online, Using the IOCONFIG Utility
- I/O configurator, Modifying Input/Output (I/O) Configurations, I/O Paths Used to Boot a System
- help facility, Getting Help with I/O Configurator Commands
- I/O
Configurator commands
- ACLASS, Adding Objects in SYSGEN
- ADEV, Adding Objects in SYSGEN
- APATH, Adding Objects in SYSGEN
- AVOL, Adding Objects in SYSGEN
- DCLASS, Deleting Objects in SYSGEN
- DDEV, Deleting Objects in SYSGEN
- DPATH, Deleting Objects in SYSGEN
- DVOL, Deleting Objects in SYSGEN
- MADDRESS, Changing Configurations in SYSGEN
- MCLASS, Changing Configurations in SYSGEN
- MDEV, Changing Configurations in SYSGEN
- MPATH, Changing Configurations in SYSGEN
- MVOL, Changing Configurations in SYSGEN
- I/O
configurator commands
- HELP, Getting Help with I/O Configurator Commands
- LCLASS, Viewing the Current Configuration
- LDEV, Viewing the Current Configuration
- LPATH, Viewing the Current Configuration
- LVOL, Viewing the Current Configuration
- MADDRESS, Using I/O Configurator Commands
- OCLOSE, Printing the Configuration Information
- I/O
path
- alternate
boot path, Determining and Selecting Input and Output (I/O) Paths
- console
boot path, Determining and Selecting Input and Output (I/O) Paths
- definition, Determining and Selecting Input and Output (I/O) Paths
- primary
boot paths, Determining and Selecting Input and Output (I/O) Paths
- I/O paths
- determining, Selecting I/O Paths
- identify test, Displaying Configured Devices
- informational
messages, Informational Messages
- initial program
load (IPL), Initiating System Activity, Testing the System
- initial system loader, Initiating System Activity, Entering the SYSGEN Global Module
- input/output
(I/O) configurator, Modifying Input/Output (I/O) Configurations, I/O Paths Used to Boot a System
- input/output
(IO) configurator, Using the System Generator (SYSGEN)
- input/output
dependent code (IODC), Initiating System Activity, The Booting Process, System Startup Functions
- INSTALL, Soft Reset
- ISL
utility, Overview
- using
to recover system, Using the INSTALL Utility to Recover a Lost System
- INSTALL options, Using the INSTALL Utility and Options
- INSTALL utility, ISL Boot Utilities, Installing the Operating System, Default Configurations Used by INSTALL and UPDATE
- installing
the operating system, Installing the Operating System
- preliminary steps, Installing the Operating System: a Preview
- interactively
booting a system, How System Startup is Carried Out
- interrupting AUTOBOOT, Interrupting an Autobooting System
- IO
- SYSGEN
command, Adding a Peripheral to Any System
- IO configurator
commands
- ADEV, Adding a Peripheral to Any System
- APATH, Adding a Peripheral to Any System
- EXIT, Adding a Peripheral to Any System
- HOLD, Adding a Peripheral to Any System
- LCLASS, Adding a Peripheral to Any System
- LDEV, Adding a Peripheral to Any System
- LPATH, Adding a Peripheral to Any System
- OCLOSE, Adding a Peripheral to Any System
- IOCONFIG Utility, Using the IOCONFIG Utility
- IODC
See input/output dependent code, Initiating System Activity
- IOMAP
- ISL
utility, Overview
- IPL
- See
initial program load, Initiating System Activity
- ISL, Initiating System Activity, Soft Reset, Resetting the System Using the Console, Initial System Loader (ISL), Activating and Deactivating Autoboot and Autosearch Functions
- ALTPATH, Using Initial System Loader (ISL) Commands, Modifying Boot Paths in Stable Storage
- AUTOBOOT, Autobooting the System, Using Initial System Loader (ISL) Commands
- AUTOSEARCH, Using Initial System Loader (ISL) Commands
- boot
utilities, Entering the DUMP Utility and Starting the System
- CLKUTIL, Reading and Setting the Hardware Clock
- commands, System Startup Functions
- CONSPATH, Using Initial System Loader (ISL) Commands, Modifying Boot Paths in Stable Storage
- defined, How System Startup is Carried Out
- DISPLAY, Using Initial System Loader (ISL) Commands, Displaying Current Boot Path, Autoboot, and Autosearch Settings
- DUMP, ISL Boot Utilities, What is the Function of the DUMP Utility?, Entering the DUMP Utility and Starting the System
- flag
status, Activating and Deactivating Autoboot and Autosearch Functions
- HELP, Using Initial System Loader (ISL) Commands
- INSTALL, ISL Boot Utilities, Installing the Operating System, Default Configurations Used by INSTALL and UPDATE
- IOMAP, Determining and Selecting Input and Output (I/O) Paths, Displaying Current Boot Path, Autoboot, and Autosearch Settings
- LISTAUTOFL, Using Initial System Loader (ISL) Commands, Listing Autoboot File Contents
- LISTF, Using Initial System Loader (ISL) Commands, Listing Available ISL Utilities
- LS, Using Initial System Loader (ISL) Commands
- LSAUTOFL, Using Initial System Loader (ISL) Commands, Listing Autoboot File Contents
- options, System Startup Functions
- PRIMPATH, Using Initial System Loader (ISL) Commands, Modifying Boot Paths in Stable Storage
- READNVM, Using Initial System Loader (ISL) Commands, Reading Nonvolatile Memory (NVM)
- READSS, Using Initial System Loader (ISL) Commands, Reading Stable Storage
- see
initial system loader, Entering the SYSGEN Global Module
- START, Starting the System, Default Configurations Used by INSTALL and UPDATE
- UPDATE, ISL Boot Utilities, The ISL Utility
- utilities, How System Startup is Carried Out, System Startup Functions
- utility
options, ISL Summary
- ISL
commands
- ODE, Running ODE
- START, Entering the SYSGEN Global Module, Overview
- ISL HELP facility
- using, Using the Help Facility for ISL Commands
- ISL settings
- example, Displaying Current Boot Path, Autoboot, and Autosearch Settings
- series
950-980, Listing Autoboot File Contents
- ISL utilities
- INSTALL, Overview
- IOMAP, Overview
- listing, Listing Available ISL Utilities
- START, Using the System Generator (SYSGEN)
- UPDATE, Overview
- ISL utility, Soft Reset
- ISL utility
names
- codes for, Reading Nonvolatile Memory (NVM)
L- LCLASS
- I/O
configurator command, Viewing the Current Configuration
- IO
configurator command, Adding a Peripheral to Any System
- LDEV
- I/O
configurator command, Viewing the Current Configuration
- IO
configurator command, Adding a Peripheral to Any System
- LIF.
See logical interchange format, Autobooting the System
- LIMIT
- MPE/iX
command, Running ODE
- LIMIT command, Limiting System Use
- limits
- configuring
job related, Configuring Job-Related Limits
- setting
session related, Setting Session-Related Limits
- listing
autoboot and autosearch settings, Displaying Current Boot Path, Autoboot, and Autosearch Settings
- listing classes, Viewing the Current Configuration
- listing devices, Determining and Selecting Input and Output (I/O) Paths, Viewing the Current Configuration
- listing paths, Viewing the Current Configuration
- listing RINS, Displaying Allocated Global RINs
- listing volumes, Viewing the Current Configuration
- LISTSPF command, Shutting the Spool Queues and Handling the Remaining Reports
- load
listing, Startup, Dump, and Shutdown Listings
- loading
a system, ISL Boot Utilities
- local devices
- configuring, Modifying Input/Output (I/O) Configurations
- LOG
- SYSGEN
command, Entering the LOG Configurator
- LOG configurator, Modifying Logging Configurations
- entering an MPE command from, Entering an MPE Command from the LOG Configurator
- exiting, Exiting the LOG Configurator
- HELP facility, Using the LOG Configurator Help Facility
- see logging configurator, Modifying Logging Configurations
- LOG
configurator commands
- CLEAR, Clearing Log Configuration Changes
- EXIT, Exiting the LOG Configurator
- HELP, Using the LOG Configurator Help Facility
- HOLD, Holding and Saving Configuration Changes
- OCLOSE, Showing Current LOG Values
- SHOW, Showing Current LOG Values
- SLOG, Logging System Events
- ULOG, Logging User Events
- LOG
values
- showing, Showing Current LOG Values
- logging
- system, Modifying Logging Configurations
- user, Modifying Logging Configurations
- logging (LOG)
configurator, Using the System Generator (SYSGEN), Modifying Logging Configurations
- see LOG configurator, Using the System Generator (SYSGEN), Modifying Logging Configurations
- logical
interchange format (LIF), Autobooting the System
- logical interface
format (LIF), Initial System Loader (ISL)
- loopback test, Displaying Configured Devices
- LPATH
- I/O
configurator command, Viewing the Current Configuration
- IO
configurator command, Adding a Peripheral to Any System
- LRIN
- MISC
configurator command, Displaying Allocated Global RINs
- LVOL
- I/O
configurator command, Viewing the Current Configuration
M- MADDRESS
- I/O
Configurator command, Changing Configurations in SYSGEN
- I/O
configurator command, Using I/O Configurator Commands
- MAPPER
- exiting, Exiting mapper2
- master consoles
- changing, Entering Escape Characters
- MCLASS
- I/O
Configurator command, Changing Configurations in SYSGEN
- MDEV
- I/O
Configurator command, Changing Configurations in SYSGEN
- message catalog
- configuring, Configuring a Message Catalog
- mid bus, Using the SYSGEN I/O Configurator
- MISC
- SYSGEN
command, Entering the MISC Configurator
- MISC configurator, Modifying Miscellaneous Configuration Elements
- entering an MPE command from, Entering an MPE Command from the MISC Configurator
- exiting, Exiting the MISC Configurator
- help
facility, Using the MISC Configurator Help Facility
- see miscellaneous configurator, Modifying Miscellaneous Configuration Elements
- MISC
configurator command
- CLEAR, Clearing MISC Configuration Changes
- EXIT, Exiting the MISC Configurator
- HOLD, Holding and Saving Configuration Changes
- JOB, Configuring Job-Related Limits
- LRIN, Displaying Allocated Global RINs
- OCLOSE, Displaying Allocated Global RINs
- RESOURCE, Setting Resource Allocations
- SESSION, Setting Session-Related Limits
- STACK, Setting Sizes of Native Mode and Compatibility Mode Stacks
- SYSTEM, Setting Strings and String Parameters
- MISC
configurator commands
- DRIN, Deleting Global Resource Identification Numbers (RIN)
- help, Using the MISC Configurator Help Facility
- SHOW, Showing Values of Current Configurable Items
- miscellaneous
(MISC) configurator, Using the System Generator (SYSGEN), Modifying Miscellaneous Configuration Elements
- see MISC configurator, Using the System Generator (SYSGEN), Modifying Miscellaneous Configuration Elements
- MMSAVE, System Startup Functions, Initial System Loader (ISL)
- modifying
addresses in SYSGEN, Changing Configurations in SYSGEN
- modifying classes
in SYSGEN, Changing Configurations in SYSGEN
- modifying devices
in SYSGEN, Changing Configurations in SYSGEN
- modifying I/O
configurations, Modifying Input/Output (I/O) Configurations
- modifying paths
in SYSGEN, Changing Configurations in SYSGEN
- modifying
system parameters, What Is System Configuration?
- MPATH
- I/O
Configurator command, Changing Configurations in SYSGEN
- MPE XL commands
- REPLY, Adding a Peripheral to Any System
- MPE XL utilities
- SYSGEN, Using SYSGEN to Copy the Files
- MPE/iX commands
- ABORTJOB, Running ODE
- HELLO, Running ODE
- JOBFENCE, Running ODE
- LIMIT, Running ODE
- SHOWJOB, Running ODE
- TELL, Running ODE
- WARN, Running ODE
- MVOL
- I/O
Configurator command, Changing Configurations in SYSGEN
N- N-Class
- default
configuration, Default Configurations Used by INSTALL and UPDATE
- NETCONTROL command, Closing Any Open Communication Lines
- network
configuration file
- defining, Replacing or Defining a Network Configuration File
- replacing, Replacing or Defining a Network Configuration File
- NOCONFIG
- UPDATE
option, Using the UPDATE Utility and Options
- nonvolatile memory
(NVM), Reading Nonvolatile Memory (NVM), Reading Stable Storage Contents
- NOSTART
- INSTALL
option, Using the INSTALL Utility and Options
- UPDATE
option, Using the UPDATE Utility and Options
- NSCONTROL command, Closing Any Open Communication Lines
- NVM. See nonvolatile
memory, Reading Nonvolatile Memory (NVM)
O- OCLOSE
- I/O
configurator command, Printing the Configuration Information
- IO
configurator command, Adding a Peripheral to Any System
- LOG
configurator command, Showing Current LOG Values
- MISC
configurator command, Displaying Allocated Global RINs
- SYSGEN
command, Showing the State of Configurators, Generating a System Load Tape
- ODE
- exiting, Exiting ODE
- ISL
command, Running ODE
- ODE
utility
- activating, Running ODE
- Online
device configuration, Using the IOCONFIG Utility
P- path
information
- stable storage, Modifying Boot Paths in Stable Storage
- PDC, Displaying Configured Devices
- PDC
See processor dependent code, Initiating System Activity
- peripheral
devices
- defined, What Is System Configuration?
- permanent configuration
files, Using the System Generator (SYSGEN)
- PERMYES
- SYSGEN
command, Confirming Potentially Serious Actions
- PERMYES
in batch mode, Redirecting SYSGEN Input and Output
- PERMYES in command
files, Redirecting SYSGEN Input and Output
- positional
parameters
- SYSGEN utility, SYSGEN Command Syntax
- primary boot paths, I/O Paths Used to Boot a System
- processor
dependent code (PDC), Initiating System Activity, The Booting Process, System Startup Functions, Initial System Loader (ISL)
R- RAUTO
- SYSFILE
configurator command, Replacing Objects on the SYSGEN Tape
- RBOOT
- SYSFILE
configurator command, Replacing Objects on the SYSGEN Tape, Replacing Boot Images
- RCAT
- SYSFILE
configurator command, Replacing Objects on the SYSGEN Tape, Configuring a Message Catalog
- RCMSL
- SYSFILE
configurator command, Replacing Objects on the SYSGEN Tape, Replacing a CMSL Segment
- RDCC
- SYSFILE
configurator command, Replacing Objects on the SYSGEN Tape, Replacing or Defining a Network Configuration File
- re-installation, Installing the Operating System
- recovery, system
failure, The ISL Utility, Updating to Recover from System Failure: a Preview, Installing the Operating System
- redirecting
SYSGEN input and output, Redirecting SYSGEN Input and Output
- reload (INSTALL), Installing the Operating System
- remote console
- disabling
access, Sending Messages to Both Consoles
- enabling
access, Configuring the Access Port
- remote line
- disconnecting, Disabling Remote Console Access
- remote
support modem
- connecting to a session port, Disconnecting the Remote Line
- removing configuration
changes, Clearing Configuration Changes
- removing
system programs from a SYSGEN tape, Removing System Programs from a SYSGEN Tape
- repeated
parameters
- SYSGEN utility, SYSGEN Command Syntax
- replacing a CMSL
segment, Replacing a CMSL Segment
- replacing
a network configuration file, Replacing or Defining a Network Configuration File
- replacing
autoboot images, Replacing Autoboot Images
- replacing boot images, Replacing Boot Images
- replacing
objects on the SYSGEN tape, Replacing Objects on the SYSGEN Tape
- replacing
operating system, The ISL Utility
- REPLY
- MPE
XL command, Adding a Peripheral to Any System
- reset, Resetting the System Using the Console
- resetting the system, Resetting the System, Resetting the System Using the Console
- hard reset, Resetting the System
- soft reset, Resetting the System
- RESOURCE
- MISC
configurator command, Setting Resource Allocations
- resource allocations
- setting, Setting Resource Allocations
- resource
identification numbers
- deleting, Deleting Global Resource Identification Numbers (RIN)
- see RIN, Deleting Global Resource Identification Numbers (RIN)
- resources
- allocating, Setting Resource Allocations
- retaining
current configuration, Backing up the System and Retaining the Current Configuration, Back up the System and Retain the Current Configuration
- RIN, Deleting Global Resource Identification Numbers (RIN)
- listing, Displaying Allocated Global RINs
- see
resource identification numbers, Deleting Global Resource Identification Numbers (RIN)
- RIPL
- SYSFILE
configurator command, Replacing Objects on the SYSGEN Tape
- RNMLIB
- SYSFILE
configurator command, Replacing Objects on the SYSGEN Tape
- RS, Resetting the System Using the Console
- access
port command, Hard Reset
- hard
reset, Hard Reset
- RSPROG
- SYSFILE
configurator command, Replacing Objects on the SYSGEN Tape
S- saving
configuration changes, Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes
- scheduling an INSTALL, Scheduling an INSTALL
- scheduling an UPDATE, Scheduling a System Update
- scripting
PERMYES, Redirecting SYSGEN Input and Output
- scrolling
- allowing, Halting Scrolling
- halting, Entering Control Mode
- self-test, Hard Reset, Displaying Configured Devices
- Series
920
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
922
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
922LX
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
922RX
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
925
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
925LX
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
932
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
935
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
948
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
949
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
950
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
958
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
960
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
980
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
990
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
991
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
992
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
995
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series
9X7
- default configuration, Default Configurations Used by INSTALL and UPDATE
- SESSION
- MISC
configurator command, Setting Session-Related Limits
- sessions
- setting
related limits, Setting Session-Related Limits
- setting resource
allocations, Setting Resource Allocations
- setting session
related limits, Setting Session-Related Limits
- setting
sizes of native mode and compatibility mode stacks, Setting Sizes of Native Mode and Compatibility Mode Stacks
- setting
strings and string parameters, Setting Strings and String Parameters
- SHOW
- LOG
configurator command, Showing Current LOG Values
- MISC
configurator command, Showing Values of Current Configurable Items
- SYSFILE
configurator command, Displaying Current File Information
- SYSGEN
command, Showing the State of Configurators
- SHOWDEV
command, Shutting the Spool Queues and Handling the Remaining Reports
- showing
current file information, Displaying Current File Information
- showing current
LOG values, Showing Current LOG Values
- showing
the state of configurators, Showing the State of Configurators
- showing
values of current configurable items, Showing Values of Current Configurable Items
- SHOWJOB
- MPE/iX
command, Running ODE
- shutdown
- abbreviated
list of steps, How System Shutdown is Carried Out
- definition, What Is System Shutdown?
- SHUTDOWN
command, How System Shutdown is Carried Out, Shutting Down the System
- shutdown
listing, Startup, Dump, and Shutdown Listings
- shutdown
sequence, DUMP Sequence
- SHUTQ command, Shutting the Spool Queues and Handling the Remaining Reports
- shutting
down the system, How System Shutdown is Carried Out
- SLOG
- LOG
configurator command, Logging System Events
- SLT, Generating a System Load Tape, Overview
- see
system load tape, Overview
- soft
reset, Soft Reset, Resetting the System Using the Console, Hard Resetting the SPU
- soft reset.
See also TC, Soft Reset
- software clock, Reading and Setting the Hardware Clock
- specifying the
base group, Specifying the Base Group
- spool
queues
- shutting, Shutting the Spool Queues and Handling the Remaining Reports
- SPU
hex status display
- disabling, Enabling the SPU Hex Status Display
- enabling, Connecting the Remote Support Modem to a Session Port
- stable storage, Modifying Boot Paths in Stable Storage
- contents, Reading Stable Storage Contents
- reading, Reading Stable Storage, Reading Stable Storage and Nonvolatile Memory
- STACK
- MISC
configurator command, Setting Sizes of Native Mode and Compatibility Mode Stacks
- stacks
- setting
sizes of compatibility mode, Setting Sizes of Native Mode and Compatibility Mode Stacks
- setting
sizes of native mode, Setting Sizes of Native Mode and Compatibility Mode Stacks
- START
- INSTALL
option, Using the INSTALL Utility and Options
- ISL
command, Entering the SYSGEN Global Module, Overview
- ISL
utility, Using the System Generator (SYSGEN)
- UPDATE
option, Using the UPDATE Utility and Options
- START
listing, Startup, Dump, and Shutdown Listings
- START options, Using START and its Options
- START
sequence, Startup, Dump, and Shutdown Listings
- START utility, Starting the System
- starting
a system, ISL Boot Utilities
- startup
- abbreviated
list of steps, How System Startup is Carried Out
- autoboot
vs. interactive, How System Startup is Carried Out
- definition, What Is System Startup?
- overview, Initiating System Activity
- startup
listing, Startup, Dump, and Shutdown Listings
- status
line display, Interpreting the System Status Line
- strings
- setting, Setting Strings and String Parameters
- strings
parameters
- setting, Setting Strings and String Parameters
- subparameters
- SYSGEN
utility, SYSGEN Command Syntax
- support, Using Initial System Loader (ISL) Commands
- SYS
account, Using the System Generator (SYSGEN)
- SYSFILE
- SYSGEN
command, Entering the SYSFILE Configurator
- SYSFILE configurator, Generating a System Load Tape, Modifying System File Configurations
- entering, Entering the SYSFILE Configurator
- help facility, Using the SYSFILE Configurator Help Facility
- see system file configurator, Modifying System File Configurations
- SYSFILE
configurator commands
- AAUTO, Displaying Current File Information
- ABOOT, Displaying Current File Information, Adding Boot Files
- ACMSL, Displaying Current File Information, Adding a Segment to the Compatibility Mode Segmented Library (CMSL)
- ASPROG, Displaying Current File Information, Adding File Names to Dump to Tape
- DAUTO, Deleting Objects from the SYSGEN Tape, Deleting Autoboot Images
- DBOOT, Deleting Objects from the SYSGEN Tape, Deleting Boot Images
- DCMSL, Deleting Objects from the SYSGEN Tape, Deleting Compatibility Mode Segments from a SYSGEN Tape
- DSPROG, Deleting Objects from the SYSGEN Tape, Removing System Programs from a SYSGEN Tape
- he,p, Using the SYSFILE Configurator Help Facility
- RAUTO, Replacing Objects on the SYSGEN Tape
- RBOOT, Replacing Objects on the SYSGEN Tape, Replacing Boot Images
- RCAT, Replacing Objects on the SYSGEN Tape, Configuring a Message Catalog
- RCMSL, Replacing Objects on the SYSGEN Tape, Replacing a CMSL Segment
- RDCC, Replacing Objects on the SYSGEN Tape, Replacing or Defining a Network Configuration File
- RIPL, Replacing Objects on the SYSGEN Tape
- RNMLIB, Replacing Objects on the SYSGEN Tape
- RSPROG, Replacing Objects on the SYSGEN Tape
- SHOW, Displaying Current File Information
- SYSGEN, Backing up the System and Retaining the Current Configuration, Back up the System and Retain the Current Configuration, Default Configurations Used by INSTALL and UPDATE
- I/O
map, Displaying Current Boot Path, Autoboot, and Autosearch Settings
- SYSGEN commands
- BASEGROUP, Specifying the Base Group, Holding and Saving Configuration Changes, Adding a Peripheral to Any System
- CLEAR, Using the System Generator (SYSGEN), Clearing Configuration Changes
- EXIT, Exiting SYSGEN
- halting, Halting SYSGEN Command Actions
- HOLD, Saving Configuration Changes
- IO, Adding a Peripheral to Any System
- KEEP, Using the System Generator (SYSGEN), Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes, Adding a Peripheral to Any System
- LOG, Entering the LOG Configurator
- MISC, Entering the MISC Configurator
- OCLOSE, Showing the State of Configurators, Generating a System Load Tape
- PERMYES, Confirming Potentially Serious Actions
- SHOW, Showing the State of Configurators
- SYSFILE, Entering the SYSFILE Configurator
- TAPE, Generating a System Load Tape, Adding a Peripheral to Any System
- SYSGEN
global module
- help facility, Using the Help Facility in SYSGEN's Global Module
- SYSGEN
tape
- deleting compatibility mode segments from, Deleting Compatibility Mode Segments from a SYSGEN Tape
- deleting objects from, Deleting Objects from the SYSGEN Tape
- placing
objects on, Replacing Objects on the SYSGEN Tape
- removing system programs from, Removing System Programs from a SYSGEN Tape
- SYSGEN Utility
- command
syntax, SYSGEN Command Syntax
- SYSGEN utility, How System Configuration Is Performed, Using SYSGEN to Copy the Files
- activating, Entering the SYSGEN Global Module, Redirecting SYSGEN Input and Output
- activating the configurators, Activating the Configurators
- clearing configuration changes, Clearing Configuration Changes
- confirming serious actions, Confirming Potentially Serious Actions
- displaying state of configurators, Showing the State of Configurators
- entering the LOG configurator, Entering the LOG Configurator
- exiting, Exiting SYSGEN
- generating a boot tape, Generating a System Load Tape
- global
module, Using the System Generator (SYSGEN)
- halting
commands, Halting SYSGEN Command Actions
- holding configuration changes, Saving Configuration Changes
- keyword parameters, SYSGEN Command Syntax
- positional parameters, SYSGEN Command Syntax
- redirecting input and output, Redirecting SYSGEN Input and Output
- repeated parameters, SYSGEN Command Syntax
- saving configuration changes, Saving Configuration Changes
- subparameters, SYSGEN Command Syntax
- SYSFILE configurator, Generating a System Load Tape
- using first level commands, Using First-Level (Global Module) Commands
- SYSGIN
- formal
file designator, Entering the SYSGEN Global Module
- SYSGOUT
- formal
file designator, Entering the SYSGEN Global Module
- SYSMAP, Displaying Current Boot Path, Autoboot, and Autosearch Settings
- SYSSTART
file, Executing Commands During System Startup
- example, Executing Commands During System Startup
- SYSSTART file modules, Executing Commands During System Startup
- SYSTEM
- MISC
configurator command, Setting Strings and String Parameters
- system
configuration
- adding a disk drive, Adding a Peripheral to Any System
- defined, What Is System Configuration?
- disk drives, Adding a Peripheral to Any System
- series 950 through 980, N-Class and A-Class Systems, Adding a Peripheral to Any System
- system dependent
errors, Generating a System Load Tape
- system failure
- recovery
from, The ISL Utility, Updating to Recover from System Failure: a Preview, Installing the Operating System
- system
file (SYSFILE) configurator, Using the System Generator (SYSGEN), Modifying System File Configurations
- see SYSFILE configurator, Using the System Generator (SYSGEN), Modifying System File Configurations
- system
generator (SYSGEN) utility
- see SYSGEN utility, How System Configuration Is Performed
- system independent
errors, Generating a System Load Tape
- system
initialization, I/O Paths Used to Boot a System
- system
load, ISL Boot Utilities
- system load tape, Overview
- see SLT, Overview
- system
load tape (SLT), Default Configurations Used by INSTALL and UPDATE
- system logging, Modifying Logging Configurations, Logging System Events
- system parameters
- defining, What Is System Configuration?
- modifying, What Is System Configuration?
- system reload
(INSTALL), Installing the Operating System
- system shutdown
- overview, Halting System Activity
- system shutdown.
See shutdown, How System Shutdown is Carried Out
- system
startup. See startup, How System Startup is Carried Out
- system status
line
- interpreting, Entering Control Mode and Using the Command Interpreter
- system testing, Displaying Configured Devices
- identify, Displaying Configured Devices
- loopback, Displaying Configured Devices
- self-test, Displaying Configured Devices
T- TAPE
- SYSGEN
command, Generating a System Load Tape, Adding a Peripheral to Any System
- tape boots, Initial System Loader (ISL)
- TC, Soft Reset, Resetting the System Using the Console
- access
port command, Soft Reset
- See
also transfer of control, Soft Reset
- soft
reset, Soft Reset
- TELL
command, Telling Users about the Shutdown, Running ODE
- temporary
configuration files, Using the System Generator (SYSGEN)
- terminals
- configuring, How System Configuration Is Performed
- testing the
access port, Transferring Control (Soft Reset)
- TLB, Displaying Configured Devices
- see
translation look aside buffer (TLB), Displaying Configured Devices
- transfer
of control, Soft Reset, Resetting the System Using the Console, Hard Resetting the SPU
- transfer
of control. See also soft reset, Soft Reset
- translation
look aside buffer (TLB), Displaying Configured Devices
U- ULOG
- LOG
configurator command, Logging User Events
- UPDATE, Soft Reset
- ISL
utility, Overview
- UPDATE options, Using the UPDATE Utility and Options
- UPDATE utility, ISL Boot Utilities, The ISL Utility
- updating
the operating system, The ISL Utility
- preliminary steps, Updating the Operating System: a Preview
- required steps, Updating the Operating System: a Preview
- user logging, Modifying Logging Configurations, Logging User Events
- using
first level (global module) commands, Using First-Level (Global Module) Commands
- using
I/O configurator commands, Using I/O Configurator Commands
- using
SYSGEN to copy configuration files, Using SYSGEN to Copy the Files
- using
the help facility in SYSGEN's global module, Using the Help Facility in SYSGEN's Global Module
- using
the system generator (SYSGEN), Using the System Generator (SYSGEN)
- utilities
- SYSGEN, How System Configuration Is Performed
- SYSGEN,
activating, Entering the SYSGEN Global Module, Redirecting SYSGEN Input and Output
- SYSGEN,
global module, Using the System Generator (SYSGEN)
- utilities - ISL
- INSTALL, Overview
- IOMAP, Overview
- START, Using the System Generator (SYSGEN)
- UPDATE, Overview
- utilities
- MPE XL
- SYSGEN, Using SYSGEN to Copy the Files
W< |
