| United States-English |
|
|
|
![]() |
A7011A/A7012A PCI-X 2-Port Gigabit Ethernet Cards on HP-UX 11i v 1.0 and 11i v 2.0 Release Notes > Chapter 1 Release Notes for PCI-X 2-PortGigabit
Ethernet Cards Overview of Software Installation Process |
|
The required operating environment is either HP-UX 11i v 1.0 or v 2.0 depending on whether you are installing to a PA-RISC-based machine (11i v1.0) or to an Itanium2®-based machine (HP-UX 11i v 2.0). To install the Operating Environment, use the Ignite-UX-11-11 Installation Utilities available on the HP-UX 11i v 1.0 (or 2.0) OE or AR media. The operating environment version should show as B.11.11 or B.11.23 when you type: uname -a at the system prompt. For instructions on how to install and configure the A7011A and A7012A hardware and software, refer to the PCI-X 2-Port Gigabit Ethernet Card for HP-UX 11i v 1.0 Installation Guide available on the web at http://docs.hp.com under “Networking and Communications.” If the A7011A or A7012A card was factory installed (ordered on product option 0D1) or is the “built-in” or “core” LAN, the LAN driver for this card will already be on your system disk. The December 2003 HP-UX 11i Operating Environment disk, or Application Software and Support Plus disks contain everything you need for HP-UX 11i v 1.0 (for PA-RISC-based machines).
The March 2004 HP-UX 11i Operating Environment disk, or Application Software and Support Plus disks contain everything you need for HP-UX 11i v 2.0 (for Itanium2®-based machines).
|
||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||