Steps for Migrating

The following is a list of the directories you will use when migrating to the HP-UX AAA Server A.06.01.x from legacy versions:

/etc/opt/aaa/: A.06.01.x working directories.
/etc/opt/aaa.old/: configuration files from your legacy AAA server installation.
/opt/aaa/newconfig/etc/opt/aaa/: backup of the default A.06.01.x files for reference.

Use the following steps to migrate to the HP-UX AAA Server A.06.01.x from legacy versions:

Backup your existing AAA server configuration.
Install the HP-UX AAA Server A.06.01.x without removing your existing HP-UX AAA Server software.
Copy the following files from /etc/opt/aaa.old/ to /etc/opt/aaa/. You do not need to modify these files when migrating to A.06.01.x:
- clients
- las.conf
- iaaaAgent.conf
- db_srv.opt
- engine.config
- DAC.grp and additional decision/policy files
Update the following A.06.01.x files in /etc/opt/aaa/ to include any modifications you made for your legacy configuration. Perform this step to include your legacy configuration in the new A.06.01.x file format. Refer to the copy of your legacy files in /etc/opt/aaa.old/ and update the corresponding A.06.01.x files listed below:
- vendors
- log.config
- radius.fsm
- dictionary
- aaa.config

Copy your legacy users files from /etc/opt/aaa.old/ to /etc/opt/aaa/ (including the default users file and all files with the .users extension). Update the users files as follows:

Remove all DEFAULT, dumbuser, pppuser, and slipuser entries. The following shows example entries for each:

DEFAULT

DEFAULT Authentication-Type = Realm
Filter-Id = "unlim"

dumbuser

dumbuser Authentication-Type = None
    Service-Type = Login,
    Login-Service = Telnet,
    Login-IP-Host = 255.255.255.255

pppuser

pppuser Authentication-Type = None
    Service-Type = Framed,
    Framed-Protocol = PPP,
    Framed-IP-Netmask = 255.255.255.0,
    Framed-Routing = None,
    Framed-MTU = 1500,
    Framed-Compression = Van-Jacobson-TCP-IP

slipuser

slipuser Authentication-Type = None
    Service-Type = Framed,
    Framed-Protocol = SLIP,
    Framed-IP-Netmask = 255.255.255.0,
    Framed-Routing = None,
    Framed-MTU = 1500,
    Framed-Compression = Van-Jacobson-TCP-IP

Remove all Authentication-Type=Realm and Authentication-Type=File strings from the remaining user entries. The following is a sample sed command you can modify to remove these entries:
$ sed -e ’s/Authentication-Type[ ]*=[ ]*Realm[ ,,]*//g’-e ’s/Authentication-Type[ ]*=[ ]*File[ ,,]*//g’ <users or *.users file name>

Use Server Manager to re-configure all of your legacy realm and outbound proxy entries on A.06.01.x. Refer to your legacy authfile at /etc/opt/aaa.old/authfile:
- Use Server Manager’s Proxies link to re-configure entries in /etc/opt/aaa.old/authfile with the following syntax:
  realm.com RADIUS <Realm_host_name>
- Use Server Manager’s Local Realms link to re-configure the realm entries as they appear in /etc/opt/aaa.old/authfile.
If you are using a Netscape Directory server, update the RADIUS schema file for the directory server. Copy /opt/aaa/examples/proldap/55iaaa-radius.ldif to the Netscape Directory server. Stop and restart slapd after copying the schema file to the Netscape server.
If you are using an OpenLDAP server, update the RADIUS schema file for the directory server. Copy /opt/aaa/examples/proldap/iaaa-radius.ldif to the OpenLDAP server. Stop and restart slapd after copying the schema file to the OpenLDAP server.




	NOTE: After completing the migration to the HP-UX AAA Server A.06.01.x, the configuration secrets in /opt/aaa/remotecontrol/rmiserver.properties and /opt/hpws/tomcat/webapps/aaa/WEB-INF/gui.properties will be the default values. Refer to “Changing the Default RMI Objects Secret” for information on changing these secrets.

Steps for Migrating

Technical documentation

» Table of Contents

» Glossary

» Index

DEFAULT

dumbuser

pppuser

slipuser