Any card with HDLC.FRAME terminals configured, must have an interface
definition line in the network configuration file. This serves to associate
a card (or mux) number with the physical location of the card in the
machine, and also specifies the firmware to be downloaded (one file only)
to the card when it is started up.
A few sample interface definitions are as follows:
Z7200A 00 0:4 /opt/acc/z7200a/loopback.zabs
|
The "z7200a" part will be different depending
on the ACC card used. It should be set to "z7400a" for
EISA cards, for example.
Printable version
